50 Gallon Mixer Tank Barrel Air Mix Stainless Steel Pneumatic Clip Bracket New

Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. This product is suitable for mixing, dilution, dissolution, reaction, emulsification, dispersion, turbidity, sedimentation prevention, etc.

It is especially suitable for mixing the paint of mixed air spraying; It applies to the chemical industry, petrochemical industry, coating, daily chemical industry, ceramics, mining, water treatment, food beverage, medicine, paper making, electronics, textile, construction, automobile, and furniture industries. Material: Stainless Steel, 304 Stainless Steel. Working Pressure: 1-3kg/2.2-6.6lbs. Net Weight: 5.35kg/11.8lbs. Mixing Rod Length: 88cm/34.64in.

Product Length: 1.135m/3.72ft. Package Size: 1141714.5cm/44.886.75.7in.

Convenient Clip: It comes with a clip that allows you to secure it to the barrel wall with a wall thickness of 24.3mm or less, so you don't need to constantly support it with your hands, which is very convenient and labor-saving. Curved Impellers: The curved impellers can drive more materials during rotation, making the mixing more uniform and effective. Silencer: The built-in silencer can keep the noise during operation at a lower level, creating a quieter working environment.

The air source of the air compressor used by the customer needs to be installed with an oil-water separator before use, otherwise, a lot of moisture in the air will run into the motor, resulting in the machine being stuck. Please note that excessively viscous materials should not be mixed with this product, as this may cause damage to the product. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.