Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: 1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness:? 24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 1141714.5cm/44.886.75.7in Package Included 1Pneumatic Mixer All Accessories for Assembly. 50 Gallon Mixer Tank Barrel Air Mix Stainless Steel Pneumatic Clip Bracket! Are you still struggling to stir the raw material manually?Are you still bothered by the poor performance of electric paint mixers? Then it's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency.
It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing results. Equipped with self cooling effect and directional valve, it can start, stop, and rotate at any time.
The pneumatic motor with high starting torque can start directly under load and automatically slow down or stop according to corresponding changes. Mixer gives you peace of mind. Speed regulation, with flexible operation, and can easily meet the different mixing speeds of various materials.It's mainly made of stainless steel, with high hardness and good. 304 stainless steel stirring rod and impeller ensure the long-term service life of the product. It can mix up to 50 gallons of paint, coatings, etc. This large mixing capability is very suitable for use in high-demand factories, improving overall work efficiency. The pneumatic mixer can run at a constant speed for a long time, which is more stable than electric tools.
Its good sealing performance is suitable for various harsh environments, such as flammable, explosive, high temperature, humid, etc. The impellers are designed to be detachable, allowing you to disassemble them for cleaning, which is very convenient.
It also eliminates the hassle of replacing carbon brushes, making maintenance easier. It comes with a clip that allows you to secure it to the barrel wall with a wall thickness of.24.3mm or less, so you don't need to constantly sup. Port it with your hands, which is very convenient and labor-saving.
Rive more materials during rotation, making the mixing more uniform and effective. The built-in silencer can keep the noise during operation at a lower level, creating a quieter working environment.
This product is suitable for mixing, dilution, dissolution, reaction, emulsification, dispersion, turbidity, sedimentation prevention, etc. It is especially suitable for mixing the paint of mixed air spraying; It applies to the chemical industry, petrochemical industry, coating, daily chemical industry, ceramics, mining, water treatment, food beverage, medicine, paper making, electronics, textile, construction, automobile, and furniture industries.
Material: Stainless Steel, 304 Stainless Steel. Working Pressure: 1-3kg/2.2-6.6lbs.Net Weight: 5.35kg/11.8lbs. Mixing Rod Length: 88cm/34.64in.
Product Length: 1.135m/3.72ft. Package Size: 1141714.5cm/44.886.75.7in. The air source of the air compressor used by the customer needs to be installed with an oil-water separator before use, otherwise, a lot of moisture in the air will run into the motor, resulting in the machine being stuck. Please note that excessively viscous materials should not be mixed with this product, as this may cause damage to the product. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
Warm tips: The air source of the air compressor used by the customer needs to be installed with an oil-water separator before use, otherwise a lot of moisture in the air will run into the motor, resulting in the machine stuck. Feedback is very important to us.It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Nice and Practical, High Quality Packaging.